is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Check for total dissolved solids

Ensure Water Quality by Checking for Total Dissolved Solids

Checking for total dissolved solids is an important task for anyone involved in water treatment or quality control. Total dissolved solids (TDS) refers to the amount of inorganic and organic substances present in a water sample that can pass through a filter. High levels of TDS can indicate contamination or other issues that may affect water quality. Here are the steps for checking for total dissolved solids:

Step 1: Collect a water sample
To begin, collect a sample of the water you want to test. This can be done using a clean container such as a glass or plastic bottle. Make sure the container is free from any contaminants that could affect the test results.

Step 2: Prepare the testing equipment
Next, prepare the testing equipment. This will typically involve using a TDS meter or a conductivity meter. These devices are designed to measure the electrical conductivity of the water sample, which can be used to calculate the level of TDS present.

Step 3: Calibrate the meter
Before using the meter, it's important to calibrate it to ensure accurate results. This will typically involve following the manufacturer's instructions to adjust the device to a known standard. This step is essential for ensuring that the test results are reliable.

Step 4: Measure the conductivity
Once the meter is calibrated, it's time to measure the conductivity of the water sample. This can be done by inserting the meter into the sample and waiting for the reading to stabilize. This may take a few seconds, depending on the device being used.

Step 5: Convert the conductivity to TDS
Finally, use the meter's built-in conversion factor or a conversion chart to convert the conductivity reading to a TDS measurement. This will give you an accurate assessment of the level of dissolved solids present in the water sample.

In conclusion, checking for total dissolved solids is an important task for anyone involved in water treatment or quality control. By following these steps, you can accurately measure the level of TDS present in a water sample and take appropriate action to ensure safe and high-quality water.

JNW 7in1 Pool Test Strips

Check Price
Chlorine and pH Test Kit for S...

Check Price
PoolMaster 150-Strip Water Tes...

Check Price
Pool Test Kit Pro

Check Price